1625
Users Manual
4
Safety Instructions
W Warning
This measuring equipment is only to be operated by quali-
fied staff and in accord with its technical data in compli-
ance with the safety precautions and instructions set forth
below. In addition, use of this equipment requires compli-
ance with the legal and safety instructions pertaining to
the specific application in question. Similar precuations
apply to the use of accessories.
Caution
Operation of electrical equipment inevitably causes certain
parts of such equipment to carry dangerous voltage. Non-
compliance with precautions may therefore cause major
physical or material damage.
Fault-free and reliable operation of this instrument requires suitable transport
and storage, setting-up and assembly, as well as care in operation and mainte-
nance.
If there is reason to believe that risk-free operation is no longer possible, the
instrument should be switched off immediately and protected against acciden-
tal restarting. Risk-free operation shall be deemed to be no longer possible if
and when the instrument
• shows visible damage,
• fails to work in spite of functioning batteries,
• has been exposed for some time to unfavorable conditions ( e.g. stor-
age beyond the permissible climatic limits without adaptation to the
ambient climate, dewing etc.),
• has been exposed to major strain during transport ( e.g. been dropped
from some height without visible external damage etc.), or
• shows " E1 ... E5 " on the display.
To Next Page
Loading...
Need help?
General
