Fluke 1750 Technical Data

4 Fluke Corporation Fluke 1750 Three-Phase Power Recorder
IEC 61000-4-30 compliant measurement systems pro-
vide the confidence that all parameters are measured
and calculated consistently with international standards.
Automated EN50160 compliance reporting for rapid Pass/
Fail testing.
Designed to help protect you and your equipment,
the Fluke 1750 Three-Phase Power Recorder and accesso-
ries are all certified to meet the stringent safety standards
for use in 600 V CAT IV and 1000 V CAT III environ-
ments. They are the first tools of their kind to carry the
CAT IV rating and, therefore, can be used for most power
connections and for all outlets in a low-voltage power
distribution system.
View data the way you want
The new Fluke Power Analyze software revolu-
tionizes your ability to analyze data. No need to
worry about thresholds—with Fluke Power Ana-
lyze, thresholds can be modified after the data is
recorded! And the easy-to-use user interface will
display voltage as a phase-to-phase or phase-to-
neutral reading.
Apply thresholds to data after collection using a variety of
standard or customized templates.
Simplified report writer feature included in Fluke Power
Analyze.
All the latest power quality
standards are built-in
600 V CAT IV and
1000 V CAT III safety rating

Fluke 1750 Specifications

General

Type	Power Quality Analyzer
Frequency Measurement Range	42.5 Hz to 69 Hz
Safety Rating	CAT IV 600 V, CAT III 1000 V
Accuracy	±0.1% of reading
Harmonics	Up to 50th harmonic
Communication	Ethernet, USB
Power Supply	100 V to 240 V AC
Channels	4 voltage, 4 current
Battery Backup	Yes, internal battery
Measurement Parameters	Voltage, Current, Power, Harmonics, Flicker
Data Logging Interval	1 second to 60 minutes
Battery Life	45 minutes (UPS)
Voltage Measurement Range	1 to 1000 V (phase to neutral)
Operating Temperature	-10 to 50 °C