5 Fluke Corporation Fluke 1750 Three-Phase Power Recorder
Optional Accessories
Fluke power quality current
transformers and flexible current
probes are specially designed
to work seamlessly with Fluke
power monitors (1750 and 1650).
All clamp-on and flexi-CT’s are
matched to take full advantage
of your instrument’s ability to
set scale factors for accurate
readings.
Cases
1750/CASE Transit Case
•
Rugged water tight transit case
with rollers
Miscellaneous
1750/MC
•
Additional SD Memory Card
for Fluke 1750
1750/SEAT-L
•
Fluke Power Analyze –
Additional SEAT LICENSE
•
One additional license for
installation on one additional
PC
1750/SITE-L
•
Fluke Power Analyze -
Additional SITE LICENSE
•
Site license for installation on
unlimited PCs
4006 Security Cable
•
1.8 m (6 ft) looped lockable
steel cable for securing monitor
Model No. CT Type Current Range Accuracy
Frequency
Response Jaw Opening
3005-PR Clamp-On 0.01 A to 5 A 1 % RDG ± 0.5 % FS 5 kHz 2 cm (.78 in) dia.
3014-PR Clamp-On 0.1 A to 40 A 1 % RDG ± 0.1 % FS 5 kHz 2 cm (.78 in) dia.
3140R Clamp-On 2 A to 400 A 2 % RDG ± 0.04 A 20 kHz 3.2 cm (1.25 in) dia.
Model No. CT Type Current Range Accuracy
Frequency
Response Probe Length
3110-PR Flexi-CT 2 A to 100 A 1 % rdg ± 0.5 % FS 7 kHz 60 cm (24 in)
3210-PR Flexi-CT 20 A to 1000 A 1 % rdg ± 0.15 % FS 7 kHz 60 cm (24 in)
3310-PR Flexi-CT 100 A to 5000 A 1 % rdg ± 0.15 % FS 7 kHz 60 cm (24 in)
3312-PR Flexi-CT 100 A to 5000 A 1 % rdg ± 0.15 % FS 7 kHz 120 cm (48 in)
To Next Page
Loading...
Need help?
General
