1
Introduction
XW Warning
To avoid electric shock or personal injury, do not perform the calibration
verification tests or calibration procedures described in this manual unless you
are qualified to do so. The information provided in this manual is for the use of
qualified personnel only.
This Calibration Manual provides all the information necessary to do basic maintenance, perform
verification, and make calibration adjustments for the 1773/1775/1777 3 Phase Power Quality
Analyzer (Analyzer or Product). For complete operating instructions, refer to the Users Manual at
www.fluke.com
.
Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to our website:
www.fluke.com
To register your product, or to view, print, or download the latest manual or manual
supplement, go to our website.
+1-425-446-5500 fluke-info@fluke.com
Safety Information
General Safety Information is in the printed Safety Information document that ships with the
Product and at www.fluke.com
. More specific safety information is listed where applicable.
A Warning identifies hazardous conditions and procedures that are dangerous to the user. A
Caution identifies conditions and procedures that can cause damage to the Product or the
equipment under test.
Specifications
Complete specifications are at www.fluke.com. See the 1773/1775/1777 Product
Specifications.
Fluke Corporation
P.O. Box 9090
Everett WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
To Next Page
Loading...
Need help?
General
