Fluke 2063513 - Page 14

Model 16 English Instruction Sheet
Page 14
Function Range Resolution Accuracy Burden Voltage
N
(50 Hz to 400 Hz)
0 to 200 µA0.1 µA ±(2% + 3 counts) <5 mV/µA
M
0 to 200 µA0.1 µA ±(1% + 2 counts) <5 mV/µA
Function
Overload
Protection
1
Input Impedance (Nominal)
f
600V rms
>5 MΩ <100 pF
V•Check and LoZ = >2 kΩ <200 pF (ac coupled)
2
E
600V rms
>10MΩ <100 pF
V•Check and LoZ = >2 kΩ <200 pF
2
Common Mode Rejection
Ratio (1 kΩ Unbalanced)
Normal Mode Rejection
f 600V rms >60 dB at dc 50 or 60 Hz
E
600V rms >100 dB at dc, 50 or 60 Hz >50 dB at 50 Hz or 60 Hz
Open Circuit Test Voltage
Full Scale Voltage
To 4.0 MΩ 40 MΩ
J
600V rms <1.5V dc <450 mV dc <1.5V dc
L 600V rms 2.4-3.0V dc 2.400V dc
Short Circuit Current
J 600V rms <500 µA
L
600V rms
0.95 mA (typical)
1. 3 x 10
6
V Hz maximum
2. ≅2 kΩ input impedance up to 50V. Impedance increases with input voltage to
>300 kΩ at 600V.
MIN MAX Recording Accuracy and Response Time
Specified accuracy of the measurement function ±12 digits in dc for changes
>200 ms in duration (±40 digits in ac). Typical 100 ms response to 80%.
Example 1: This would mean ±1.2° when recording temperature.
Example 2: This would mean ±1.2 µA when recording µA or ±12A if used with a
dc amp probe (with a mV input).