Fluke 28 II Ex Safety Instructions

8
6. Maintenance
Warning
To prevent electrical shock or personal injury, have the Product repaired by ecom Instruments
GmbH or an ecom authorized service center to keep Product certification.
6.1 General Maintenance
To clean the external surfaces of the Product, wipe the case with a damp cloth and mild
detergent.
Do not use abrasives or solvents.
Dirt or moisture in the terminals can cause incorrect measurements and can falsely set off the
Input Alert feature. Clean the terminals as follows:
1. Turn the Product off and remove all test leads.
2. Shake out dirt that can be in the terminals.
3. Soak a clean swab with mild detergent and water.
Move the swab around in each terminal. Dry each terminal with canned air to push the water
and detergent out of the terminals.

Fluke 28 II Ex Specifications

General

Diode test	Yes
Product type	Digital multimeter
Product color	Black, Red
Frequency range	0.0005 - 199.99 kHz
DC current range	0.0000001 - 10 A
DC voltage range	0.0001 - 1000 V
Resistance range	0.1 - 50000000 Ω
Measuring category	CAT IV 600V
Placement supported	Handheld multimeter
Basic accuracy (frequency)	0.005%
Basic accuracy (DC current)	0.2%
Basic accuracy (DC voltage)	0.05%
Temperature measurement range	-200 - 1090 °C
Battery type	AAA
Power source	Battery
Battery technology	Alkaline
Number of batteries supported	3
Operating altitude	0 - 2000 m
Maximum storage altitude	10000 m
Operating relative humidity (H-H)	0 - 80 %

Weight and Dimensions

Depth	198.1 mm
Width	100 mm
Height	6.35 mm
Weight	698.5 g