Fluke 572 Getting Started

10
572/574/576
Features and Requirements
Note! The factory default setting of your
unit is Centigrade. This can be changed into
Fahrenheit by switching the appropriate DIP
switch. See Chapter “DIP Switch Settings”.
Your thermometers include:
• Coaxial Laser sighting
• Adjustable emissivity
• High Alarm
• 7 Second Hold
• Trigger Lock
• Tripod Mount
• Graphic Display
• Low Alarm (574/576)
• MAX, MIN, DIF, AVG (574/576)
• Data Logger (574/576)
• Probe Jack (574/576)
• Companion Software (574/576)
• Digital Camera (576)
Requirements to use the software of the
thermometers (Models 574/576)
• 200 Mhz processor (400 Mhz
recommended)
• CD/DVD drive
• RS232 COM port (model 574)
• USB 1.1 - port (model 576)
• 15 MByte free diskspace on the
hard drive
The software works with Microsoft
®
Windows
®
NT (for model 574 only), 2000, or XP.

Fluke 572 Specifications

Temperature

temperature range	-30 to 900°C (-25 to 1600°F)
ambient operating range	0 to 50°C (32 to 122°F)
storage temperature	-20 to 50°C (-4 to 122°F)

Display

display resolution	0.1°C (0.2°F)
accuracy at 25°C	± 0.75% of reading or ± 1K (± 1.5°F)
repeatability	±0.5% of reading or ±1°C (±2°F)

Power

power	2 x 1.5 V Alkaline Type AA
battery life	13 hrs. (50% laser and 50% backlight used)
response time (95%)	250 mSec

Dimensions

dimensions	200 x 170 x 50 mm (7.9 x 6.7 x 2 inches)
tripod mount	1/4”-20 UNC
optical resolution (standard focus)	60 : 1 (19mm spot size at 1.15M)