Fluke 5730A Manual

Selection guide
Multi-Product
Calibrators
Multifunction
Calibrators
Oscilloscope
Calibrators
Electrical
Tester
Calibrator
Power and Energy
Calibrators and Standards
Precision Process
Calibrators
Workload 5080A 5502A 5522A 5730A 9500B 5322A 6003A 6100B 6105A 525B 7526A
Analog/panel meters
High burden meters
Low burden meters V dc & V ac V dc, I dc & R V dc, I dc & R
DMMs
Basic dc V accuracy 100 ppm 50 ppm 11 ppm 3.5 ppm n/a 0.10 % 375 ppm 112 ppm 42 ppm 40 ppm 40 ppm
3.5 digits
(typ. ± 0.3% dcV)
V dc & V ac V dc, I dc & R V dc & V ac
4.5 digits
(typ. ± 0.025% dcV)
5.5 digits
(typ. ± 0.015% dcV)
6.5 digits
(typ. ± 0.0030 % dcV)
7.5 digits
(typ. ± 16 ppm dcV)
8.5 digits
(typ. ± 8 ppm dcV)
Temperature/pressure
RTD simulate
RTD measure
Thermocouple simulate
Thermocouple measure
Pressure modules opt opt opt
Two-wire transmitters
Oscilloscopes 1 to 5 channels
200 MHz to 600 MHz
200 MHz
opt
300 MHz or
600 MHz
opt
600 MHz
opt
600 MHz std
1.1 GHz 1 GHz opt 9510 Head opt
3.2 GHz 9530 Head opt
6.4 GHz 9560 Head opt
25 ps fast edge (14 GHz) 9550 Head opt
Safety testers
Hipot
Megohm meters MEG opt
Installation
PATs
Continuity MEG opt
Loop impedance
Leakage current
Ground bond
RCD/GFCI
Medical safety
Power/energy
Wattmeters
Harmonic analyzers PQ opt
Flicker meters PQ opt PQ opt
Phase angle meters PQ opt
Power analyzers PQ opt PQ opt
Power recorders
Secondary energy
standards
Watt-hour/energy meters E opt
Other
Clamp meters
52120A Amp
+ COIL Opt
52120A
Amp +
COIL Opt
LCR meters RC only RC only
Process calibrators
Data acquisition
Non sine waveforms
RF millivolt meters
30 and 50
MHz WB opt
# of calibrator functions 8 11 11 5 11+ 9 9 8 8 9 9
www.flukecal.com

Fluke 5730A Specifications

General

Type	Multifunction Calibrator
Resistance Range	0 to 1 GΩ
AC Voltage Frequency	10 Hz to 1 MHz
Display	Color LCD
Interfaces	RS-232, Ethernet
Weight	18 kg
DC Voltage Range	0 to ±1100 V
Dimensions	172 mm H x 432 mm W x 457 mm D (6.8 in H x 17 in W x 18 in D)