Fluke 574 - Setup Alarm; High Alarm Configuration; Low Alarm Configuration

19
574
Setup Alarm
N
A
6
D
C
The low alarm (LoAl)
generates an audible and
visual (flashing LED (A)
and laser) alarm if the
temperature is below the
setpoint. To set the alarm
value (6), Press SETUP
(N) twice and use the Up
and Down keys (C).
Then press ENTER (D)
to activate this setpoint.
N
A
6
C
D
The high alarm (HiAl)
generates an audible and
visual (flashing LED (A)
and laser) alarm if the
temperature is above the
setpoint.
To set the alarm value (6),
Press SETUP (N) once,
and use the Up and Down
keys (C).
Then press ENTER (D)
to activate this setpoint.
HIGH ALARM
LOW ALARM