Fluke 574 - Factory Defaults

32
574
Factory Defaults
Power 2 x 1.5 V Alkaline Type AA
Battery Life 13 hrs. (50% laser and 50% backlight on)
Power supply 7.5 V
>
200 mA (Using the power supply
(External) the display automatically switches on)
Dimensions 200 x 170 x 50 mm (7.9 x 6.7 x 2 inches)
Tripod Mount 1/4”-20 UNC
Data logger
100 points
pre-set with emissivity 0.95
Lo-Al:
0°C
Hi-Al:
50°C
adjustable only via Software
Accessory
Default Range
Emissivity/Gain 0.95 0.10 to 1.50
in steps of 0.01
Emissivity Table Free 30 materials
Mode normal
Hi Alarm 50°C (100°F) -30 to 900°C
(-25 to 1600°F)
Lo Alarm 0°C (32°F) -30 to 900°C
(-25 to 1600°F)
Offset Adjust 0°C (0°F) -10 to 10°C
(-18 to 18°F)
Graphic Display Auto Range Auto Range
/ Man Range
Cycle Time 0.2 sec 0.1 sec to 300 sec