Fluke 574 - DIP Switches Configuration

26
574
DIP Switches
Backlight:
Backlight On or Of
f.
Set Default:
Activates the factory defaults
by overwriting listed settings
(see specifications).
Ltd.
Access:
No function buttons will work.
Laserflash: The laser flashes in case of
over- or underranging of the
alarm values.
Lock
C/ F
Digi/Ana
Laserflash
Ltd. Access
Ltd. Access
Set Default
Backlight
Buzzer
TC-J/TC-K
NTC/TC
Time/Date
Printer
ON
Factory Defaults�
DIP-Switch Settings�
Lock:
°C/°F: changes between
Buzzer:
Digi/Ana:
Digital or Analog output.
Time/Date:
Time or date shown on
the display.
T
rigger locked
(on) or
unlocked (of
f).
°C/°F: changes between
°
C and
°
F and
date and time
format.
Audible alarm
On or Off.
Change the setting in the
unit by using the DIP
switches located in the
battery compartment (see
BA
TTERIES section).
BATTERIES section).BA
NTC/TC:
Thermistor (NTC) or
thermocouple (TC).
TC-J/TC-K:
Type of thermocouples.