Fluke 574 - Data Logging and Recall; Storing Measurement Data; Recalling Stored Data

22
574
Data Logging and Recall
H
OW TO STORE DATA
T
o Recall stored data,
To Recall stored data,T
press the ENTER button
(D), without pulling the
trigger
.
Then press the
DATA button (M) until RCL
appears on the display
.
A
log location will be shown
(6).
To select another log loca-
tion, use the Up and Down
keys (C).
DA
T
DATDA
A
TAT
RECALL
M
6
D
D
C
C
By pressing the ENTER
button (D) the LOG
function (6) appears on
the display. Pull the trigger
(F) and hold it. Aim at the
target. Be sure that the
laser sighting is inside
the target. Gently release
the trigger to record the
temperature. The next
location will be shown
on the display
.
This function is also initiat
-
ed by pressing the DATA
button (M) once.
D
D
6
6
F
M