Fluke 574 - Setup - Offset and Min-Max Values; Temperature Offset Adjustment

21
574
Setup - Offset and Min-Max Values
MODE
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MAX MIN DIF AVG TC/NTC
MIN-MAXMIN-MAX
O
6
N
D
C
confirm. The OFFSET feature allows the temperature
values for several units to be matched, correcting for
the allowed temperature tolerance difference between
units. The OFFSET function can also be used to
increase the accuracy for a narrow temperature range.
This function is used with a
selected emissivity to add
or subtract an offset value
(±10°C/±18°F) to the
temperature value. Press
the Setup button (N) until
"Offset" appears in the
display. With the arrow
keys (C) adjust the display
to the corrected value.
Press ENTER (D) to
OFFSET
T
o show the minimum
To show the minimumT
and maximum
temperature values dur-
ing a measurement at the
bottom of the display,
press MODE (O) until the
two values appear (6).
MIN-MAX V
ALUES
MIN-MAX VALUESMIN-MAX V
MODE