Fluke 62 MAX Calibration Information

June 2013 ©2013 Fluke Corporation. All rights reserved. 1
62 Max/62 Max +
Infrared Thermometer
Calibration Information
Introduction
The Fluke 62 MAX and 62 MAX + Infrared Thermometers (the Product) can determine the surface temperature by
measurement of the infrared energy radiated from the target surface.
Note
Japanese models indicate Celsius only.
Warning
To prevent personal injury, read all safety information before you use the
Product.
Contact Fluke
To contact Fluke, call one of the following telephone numbers:
• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-03-6714-3114
• Singapore: +65-6799-5566
• Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To download manuals, or to see, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.

Fluke 62 MAX Specifications

General

Type	Infrared environment thermometer
Purpose	Outdoor
Placement	Hand
Display type	Digital
Product color	Yellow
Display form factor	Rectangular
International Protection (IP) code	IP54
Accuracy	1 °C
Response time	500 ms
Spectral response	8 - 14 µm
Min/Max temperature memory	Yes
Temperature measurement range	-30 - 500 °C
Temperature measurement units	F, °C
Certification	EN 61326-1:2006 EN 61326-2:2006 EN/IEC 61010-1: 2001 EN 60825-1 Class II
Battery type	AA
Power source	Battery
Number of batteries supported	1
Operating altitude	0 - 2000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Battery life	10 h

Weight and Dimensions

Depth	75 mm
Width	85 mm
Height	175 mm
Weight	255 g