Fluke 6200-2 - Pushbuttons; Beeper

Appliance Tester
Features
5
Pushbuttons
Use the pushbuttons in Table 4 to control operation of the Tester.
Table 4. Pushbutton Controls
MEM
CLEAR
PRINT
BOND
200 mA
BOND
25 A
INSUL-
ATION
I
SUB
LOAD/
LEAK
I
TOUCH
IEC
LEAD
ZERO
1 2 43 5 6
7
89101112
hdc09.eps
No. Function No. Function

Start the 200 mA Earth Bond test

Clear stored data

Start the high current Earth Bond test

Print test results

Start the combined Load/Earth Leakage
Current test

Start zeroing the Earth Bond test

Start the Insulation test

Start the IEC Lead test

Start the Touch Current test

Start the Substitute Leakage Current test

Store test results

Stop the current action and return to idle
screen
Beeper
The Tester can make several types of beeper sounds, see Table 5.
Table 5. Beeper Sounds
Sound Explanation
Click A button is pushed.
1 beep A test passed.
2 beeps close together
- A test failed.
- Warning, see display.
- The STOP button is pushed, the current action is stopped.
1 long beep A continuous non-live test has been started.
2 beeps + 1 long beep A continuous live test has been started.
Continuous 2 tone sound Dangerous condition! Unplug the unit immediately!