Fluke 712B/EN User Manual

RTD Calibrator
Auto Power-Off
13
Auto Power-Off
The product provides an auto power-off function to save
power. When the auto power-off mode is enabled, the
Product automatically powers off after 15 minutes of
inactivity.
To enable the auto power-off mode:
1. Push .
2. When SHIFT shows on the display, push .
3. In the displayed setting list, highlight the Auto
poweroff option, and then use  to select this option.
To disable the the auto power-off mode:
1. Push .
2. When SHIFT shows on the display, push .
3. In the displayed setting list, highlight the Auto
poweroff option, and then use  to deselect this
option.
Auto Backlight-Off
The Product provides an auto backlight-off function to
save power. When the auto backlight-off mode is enabled,
the backlight automatically turns off after 2 minutes of
inactivity.
To enable the auto backlight-off mode:
1. Push .
2. When Shift shows on the display, push .
3. In the displayed setting list, highlight the Auto
backlight off option, and then use  to select this
option.
To disable the the auto backlight-off mode:
1. Push .
2. When Shift shows on the display, push .
3. In the displayed setting list, highlight the Auto
backlight off option, and then use  to deselect this
option.

Fluke 712B/EN Specifications

General

Brand	Fluke
Model	712B/EN
Category	Test Equipment
Language	English