718 30G/100G
Users Manual
18
In Case of Difficulty
• Check the battery, test leads, pressure module, and
pressure tubing. Follow replacement and connection
instructions properly.
• Review this instruction sheet to make sure you are
using the Calibrator correctly.
If the Calibrator needs repair, and the Calibrator is under
warranty, see the warranty statement for terms. If the
warranty has lapsed, the Calibrator can be repaired and
returned for a fixed fee.
Cleaning
Periodically wipe the case with a damp cloth and
detergent; do not use abrasives or solvents.
Calibration
Fluke recommends that you calibrate your Calibrator once
a year to ensure that it performs according to its
specifications. A calibration manual is available (PN
686540). Call 1-800-526-4731 from the U.S.A. and
Canada. In other countries, contact a Fluke Service
Center.
To Next Page
Loading...
Need help?
General
