Milliamp Process Clamp Meter
Safety Information
3
• When you measure, keep your fingers behind the Tactile
Barrier. See Figure 1.
• Do not use with a non-insulated conductor.
• Do not use near strong magnetic fields.
• Remove test leads before you open the case.
WCaution
To prevent damage to the Meter, do not open it. Do not use a
solvent to clean the Meter, and do not put the Meter in water.
773
MILLIAMP PROCESS
CLAMP METER
1
2
gep06.eps
Number Description
A Detachable clamp
B Tactile Barrier docked and un-docked.
Figure 1. Tactile Barrier
To Next Page
Loading...
