WARRANTY
Notwithstanding
any provision of any agreement the following
warranty
is
exclusive:
The
JOHN
FLUKE MFG. CO.,
INC.,
warrants each instrument
it manufactures
to
be
free from defects in material and
workmanship under
normal
use
and
service for the period of
1
-year from
date
of
purchase. This
warranty
extends only
to the
original purchaser. This warranty
shall not apply to fuses,
disposable batteries
(rechargeable
type
batteries are
warranted
for 90-days), or any product or
parts which have
been subject to misuse,
neglect, accident, or abnormal
conditions of
operations.
In
the event
of
failure of a product covered
by
this
warranty,
John Fluke Mfg.
Co., Inc., will repair and calibrate an
instrument returned to an
authorized
Service Facility within
1
year of the original
purchase; provided the warrantor's
examination discloses to its satisfaction that the product
was defective. The
warrantor may,
at
its option; replace
the
product
in lieu of repair. With regard to any instrument
returned within
1
year of the original purchase, said repairs or
replacement
will be made without charge. If the failure
has been
caused by misuse, neglect,
accident,
or abnormal
conditions
of operations,
repairs will
be
billed at
a
nominal
cost. In
such
case,
an estimate will
be submitted
before
work is started,
if requested.
THE
FOREGOING WARRANTY
IS
IN
LIEU OF ALL OTHER
WARRANTIES, EXPRESS
OR
IMPLIED,
INCLUDING BUT NOT LIMITED
TO
ANY
IMPLIED WARRANTY
OF MERCHANTABILITY, FITNESS,
OR ADEQUACY
FOR ANY
PARTICULAR PURPOSE
OR
USE.
JOHN FLUKE
MFG
CO..
INC., SHALL
NOT
BE
LIABLE FOR
ANY
SPECIAL, INCIDENTAL,
OR
CONSEQUENTIAL DAMAGES, WHETHER
IN
CONTRACT,
TORT, OR
OTHERWISE.
If any failure
occurs, the following
steps should
be
taken:
1.
Notify the JOHN FLUKE
MFG. CO., INC,, or nearest
Service facility,
giving
full details of the difficulty, and
include the
model number,
type number, and serial number.
On receipt
of
this information, service data,
or
shipping
instructions will be forwarded
to
you.
2. On
receipt of the
shipping
instructions, forward the
instrument, transportation
prepaid.
Repairs will
be
made
at the Service Facility
and the instrument returned, transportation
prepaid.
SHIPPING TO MANUFACTURER FOR REPAIR
OR ADJUSTMENT
All shipments of JOHN
FLUKE
MFG.
CO.,
INC., instruments should
be made via United Parcel Service or "Best Way”*
prepaid. The
instrument should be shipped in the original
packing carton; or if it is not
available, use
any suitable
container that is
rigid
and
of
adequate size.
If
a
substitute container
is used, the
instrument
should be wrapped
in paper
and surrounded
with
at least
four inches
of excelsior or similar shock-absorbing material.
CLAIM
FOR DAMAGE IN SHIPMENT TO ORIGINAL PURCHASER
The instrument
shoulo
be
thoroughly inspected immediately upon original delivery
to
purchaser.
All
material
in
the
container
should be checked
against
the enclosed
packing list.
The manufacturer
will
not
be
responsible for
shortages
against the
packing sheet unless notified immediately. If the instrument is damaged in any way,
a
claim should be
filed
with the
carrier immediately. (To obtain a quotation to repair shipment damage, contact the nearest Fluke
Technical
Center.) Final
claim and negotiations with the carrier must
be
completed by the customer.
The
JOHN
FLUKE MFG. CO.,
INC, will
be happy to
answer all
applications or use questions, which
will enhance your
use
of this instrument.
Please address your requests or correspondence to: JOHN FLUKE MFG.
CO.,
INC., P.O.
BOX
C9090,
EVERETT,
WASHINGTON
98206,
ATTN:
Sales Dept.
For
European
Customers: Fluke (Holland) B.V., P.O. Box
5053,
5004 EB,
Tilburg, The
Netherlands.
*For European
customers, Air
Freight
prepaid.
John
Fluke
Mfg.
Co.,
Inc., P.O. Box
C9090,
Everett, Washington
98206
Rev. 6/81
To Next Page
Loading...
