8600A
5-1.
INTRODUCTION
5-2.
This
section
contains
an illustrated parts breakdown
of the
instrument.
Components
are
listed
alpha-numerically
by assembly.
Electrical
components are listed by reference
designation and
mechanical components are
listed by item
number. Each
listed
part is shown in an accompanying
illustration.
5-3.
Parts
lists include the following information:
a. Reference
Designation or Item Number
b. Description of
each part
c. Fluke Stock
Number
d. Federal Supply
Code for Manufacturers. See
Appendix
A for Code-to-Name
list.)
e. Manufacturer’s
part
Number
or Type.
f.
Total Quantity per assembly
or component.
g.
Recommended
Quantity:
This entry indicates
the
recommended number
of spare parts necessary
to support
one to five instruments
for
a
period of
two
years. This
list
presumes
an
availability of
common electronic
parts
at
the maintenance
site.
For
maintenance
for one year or more
at
an
isolated site,
it
is
recommended that
at
least
one in
each
assembly
in
the instrument be
stocked. In the
case of
optional subassemblies, plug-ins,
etc. that
are not
always part of the instrument,
or are
deviations
from
the basic instrument mode, the
REC
QTY column
lists the recommended quantity
of the item
in
that particular assembly.
5-6.
To ensure
prompt
and
efficient
handling
of your
order, include the following
information.
a.
Quantity
b. FLUKE
Stock Number
c.
Description
d. Reference Designation
or Item
Number
e.
Printed Circuit Board Part
Number
f.
Instrument model
and Serial number
5-7.
USE CODE EFFECTIVITY
LIST
USE
CODE
SERIAL NUMBER EFFECTIVITY
For
U8, page
5-3
A
Up
to 42560 order CMOS
B
42560
and above order
PMOS
h. Use
Code
is
provided to identify certain
parts that
have
been
added, deleted
or modified during pro-
duction of
the instrument. Each
part for which
a
use
code has been assigned
may be identified with
a particular
instrument serial
number by consulting
the Use Code
Effectifity,
paragraph
5-7.
5-4.
HOW
TO OBTAIN PARTS
5-5.
Components
may
be
ordered
directly from the
manufacturer
by
using
the
manufacturer’s part number, or
from the John
Fluke Mfg.
Co., Inc. factory
or authorized
representative
by using
the FLUKE STOCK
NUMBER. In
the event
the
part you order
has been replaced
by a
new
or
improved part,
the
replacement will
be accompanied by
an
explanatory
note and installation
instructions, if neces-
sary.
5-2
1/77
To Next Page
Loading...
