Fluke 9142 - 1.4 Safety Information

914X Field Metrology Wells
Safety Information
4
Symbol Description
Electric Shock
Fuse
PE Ground
Hot Surface (Burn Hazard)
Read the User’s Guide (Important Information)
Off
On
Canadian Standards Association
C-TICK Australian EMC mark
The European Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/
EC) mark.
1.4 Safety Information
Field Metrology Wells are designed in accordance with IEC 61010-1, IEC 61010-2-010 and
CAN/CSA 22.2 No 61010.1-04. Use this instrument only as specied in this manual. Other-
wise, the protection provided by the instrument may be impaired. Refer to the safety informa-
tion in the Warnings and Cautions sections below.
The following denitions apply to the terms “Warning” and “Caution”.

“Warning” identies conditions and actions that may pose hazards to the user.

“Caution” identies conditions and actions that may damage the instrument being used.