Fluke 9142 - 4.3 System Menu

31
Menu Structure
System Menu
4.3 System Menu
Figure 14
9142/9143/9144 MAIN MENU
F1 F2 F3 F4
TEMP SETUP PROG MENU SYSTEM MENU INPUT SETUP (-P only)
F1 SYSTEM SETUP
F1 DISPLaY SETUP
LANGUAGE: <English, Japanese, Chinese, German, Spanish, French, Russian, Italian> <select>
DECIMAL: <PERIOD, COMMA> <select>
KEY AUDIO: <ON, OFF> <select>
F2 COMMunication SETUP
BAUD RATE: <1200, 2400, 4800, 9600, 19200, 38400> <select>
LINEFEED: <ON, OFF> <select>
F3 DATE TIME (-P only)
TIME: <24 hour time only> <edit>
DATE: <edit>
DATE FORMAT: <MM/DD/YYYY, DD/MM/YYYY> <select>
TIME STAMP: <ENABLE, DISABLE> <select>
F2 PASSWORD
USER PASSWORD: <edit>
PROTECTION: <LOW, HIGH> <select>
F3 CALIBration
F1 CALPOINTS
TEMPerature 1: <edit>
TEMPerature 2: <edit>
TEMPerature 3: <edit>
GRADient 1: <edit>
GRADient 2: <edit>
GRADient 3: <edit>
GRADient 4: <edit> (9144 only)
GRADient 5: <edit> (9144 only)
CALibration DATE: <edit> <yyyy.mm.dd>
F2 CONTRoLler
TEMPerature Proportional Band: <edit>
TEMPerature INTegration: <edit>
TEMPerature DERivative: <edit>
F3 CALibration REFerence (-P only)
REF C0: <edit>
REF C100: <edit>
INPUT CALibration DATE: <edit> < yyyy.mm.dd >
F4 CALibration UUT (-P only)
F1 CALibration TC
TC C0: <edit>
TC C100: <edit>
TC CRJ: <edit>
INPUT CALibration DATE: <edit> < yyyy.mm.dd >
F2 CALibration mA
mA C4: <edit>
mA C22: <edit>
INPUT CALibration DATE: <edit> < yyyy.mm.dd >
F4 SYSTEM INFO <view only>
MODEL: <view only>
SERIAL number: <view only>
FirmWare VERsion: <view only>
CALibration DATE: <view only>
INPUT CALibration DATE: : <view only> (-P only)
Main Menu - System Menu