Fluke 9142 - Languages; Language Selection; Figure 9 Jumper Locations For 3-Wire And 2-Wire Connections

914X Field Metrology Wells
Languages
24
Figure 9 Jumper locations for 3-wire and 2-wire connections
Thermocouple (TC) Connector (4)
The TC connector allows for the use of subminiature TC connectors (see CE Comments on
page 8 for information on using clamp-on ferrites).
Fuse (5)
Fuse for the 4-20 mA circuit. Always replace with a fuse of the appropriate rating (see Section
2.1, Specications, on page 11).
3.3 Languages
The display on Field Metrology Wells can be set to different languages depending on the
conguration.

European: English, French, Spanish, Italian, German

Russian: Russian, English

Asian: English, Chinese, Japanese
3.3.1 Language Selection
Select the language to be displayed by following the steps shown in Figure 10 on opposite
page.