Fluke LinkRunner Duo User Manual

LinkRunner Duo
TM
Network MultiMeter
Quick Reference Guide
Welcome
Thank you for purchasing Fluke Networks LinkRunner Duo! This test tool enables you to quickly verify Ethernet
copper/fiber cables, network connectivity and availability. In addition, the instrument provides multiple tools for
identifying the network device to which it is connected, identifies PoE ports, provides a Report generating function,
and can serve as a reflector (optional feature) for Fluke Networks performance tests. You can use the included
LinkRunner Connect PC application to quickly configure and update the instrument, download and view reports, and
other useful functions.
Safety
To register your LinkRunner Duo or to obtain a keycode for a purchased option, go to
www.flukenetworks.com/register
. You can also register by sending e-mail to support@flukenetworks.com.
What’s in the box?
Item
1. LinkRunner Duo
2. LinkRunner Connect CD
3. Quick Reference Guide
4. Wireview
TM
Office Locator #1
(not supplied with LRDUO-CE)
5. USB-A – USB-B Mini Cable
6. Registration Card
7. Batteries (4 AA)
8. RJ-45 Coupler
(not supplied with LRDUO-CE)
1
5
8
4
3
7
6
2
PN 3468966, April 2009
© 2009 Fluke Corporation. All rights reserved. Printed in USA
All product names are trademarks of their respective companies
.

Fluke LinkRunner Duo Specifications

General

Brand	Fluke
Model	LinkRunner Duo
Category	Multimeter
Language	English

Summary

External Features

Navigation

Home Screen

Displays link, speed/duplex, length, utilization, security, connection, and wire map information.

PING Screen

Displays Tx/Rx summary, Router, DHCP, DNS, and configured IP addresses.

LLDP, EDP, CDP Screen

Displays switch address, name, slot/port, and VLAN ID.

Power over Ethernet

Displays Power over Ethernet voltage levels for each connector pin.

Flash Hub Port Screen

Causes the device to link/unlink at selected speed to identify ports.

Reports Screen

Allows saving up to four reports for viewing on a PC.

Packet Reflector Screen

Enables packet reflector mode for network performance tests.

Toner Screen

Generates digital or analog tones for tracing connections.

Configuration Screen

Accesses functions like version, preferences, PING setup, and firmware updates.

Interpreting Port Status

RJ45 LAN Port Status Interpretation

Explains cable/link status, speed/duplex, cable length, and indicators for RJ45 ports.

Fiber Port Status Interpretation

Explains fiber/link status, speed/duplex, and optical signal strength.

Understanding Display Functions

Home Screen Details

Details link information, wire map functions, and PoE detection on the Home screen.

Additional Home Screen Messages

Describes specific messages displayed on the Home screen during operations.

PING Function Details

Explains the PING function, summary, and detailed IP address results.

LLDP, CDP, EDP Function

Displays switch address, name, slot/port, and VLAN ID for network discovery.

PoE Detection

Shows which pins/wires have PoE voltage and their levels.

Flash Hub Port Function

Negotiates link to locate switch ports by flashing LEDs.

IntelliTone Function

Pairs with a probe to generate tones for tracing connections.

Reflector Mode Configuration

Enables packet reflector mode for network performance tests.

Saving and Managing Reports

Allows saving report summaries and managing them via PC.

Configuration Options

Accesses serial number, MAC, version, preferences, and PING setup.

User Preferences

Configure duplex, 802.1X security, cable length units, and power off timeout.

LinkRunner IP Address Configuration

Configure DHCP or manual IP, Mask, and Router addresses.

PING IP Address Entry

Allows entry of up to 10 IP addresses to ping.

Reports Edit/Erase

Edit report names and erase stored reports.

Reflector Mode Configuration Options

Configure packet type, source/destination swap for reflector mode.

Option Key Entry

Enable optional features by entering key codes.

Firmware Update

Download and install the latest LinkRunner Duo firmware.

Restore Factory Defaults

Reset the unit to its original factory settings.

Device Specifications and Compliance

Agency Certification and Approval

Lists certifications from CSA, C-Tick, FCC, and European Union directives.

General Specifications

Details media access, cable tests, tone generator, UI, ports, and warranty.

Mechanical and Electrical Specifications

Provides weight, dimensions, and RJ-45 port voltage rating.

Security Features

Details operational security, specifically IEEE 802.1X authentication.

Environment Specifications

Lists operating temperature, humidity, vibration, and connection restrictions.