Integrated Network Analyzer
Using the Analyzer
11
Running the Analyzer on Internal and External Batteries
The analyzer comes with an internal Lithium-Ion battery which is capable of
powering the analyzer for approximately 45 minutes.
An external Lithium-Ion battery is shipped with each analyzer. It attaches to the
back of the analyzer (see “Connecting the External Battery” on page 12). This
external battery will extend the operation time by approximately 2 1/4 hours.
Note
The analyzer always operates off the external battery until the
external battery reaches a low charge state. At that point the
analyzer automatically switches to the internal battery.
To Next Page
Loading...
