Fluke PLS 3R User Manual

11
Point Laser Levels
Existing Item Plumb Check
Existing Item Plumb Check
To determine if an existing item is plumb:
1. Point either the up or down laser at the target area.
2. Measure the distance from the item to the laser at various distances from the Product. See Figure 5.
If the measurements are the same, the item is plumb.
=
=
2
1
OK
2
1
Figure 5. Existing Item Plumb Check

Fluke PLS 3R Specifications

General

Brand	Fluke
Model	PLS 3R
Category	Laser Level
Language	English