ScopeMeter® Test Tool 190 Series II
Users Manual
$
Notes
1) Sometimes application software may require a different port number. (for example in the range Com 1..4).
In this situation the COM port number can be changed manually.
To manually assign a different COM port number right click on ‘Fluke USB Serial Port COM(5)’ and select
properties. From the Properties menu, select the Port Settings tab, and click ‘Advanced…’ to change the
port number.
2) Sometimes other applications installed on the PC automatically occupy the newly created port. On most
situations it is sufficient to unplug the Fluke 190 Series II ScopeMeter
®
USB cable shortly and then re-
connect the cable.
To Next Page
Loading...
