ScopeMeter® Test Tool 190 Series II
Users Manual
A
Figure 37. HF Voltage Probe Connection Using
Ground Spring
Warning
To avoid electrical shock or fire, do not
connect the ground spring to voltages higher
than 30 Vrms from earth ground.
Figure 38. Electronic Connections for Measurements
Using Hook Clips and Alligator Clip Grounding
Warning
To avoid electrical shock, re-apply the insulation
sleeve (Figure 1, item e) over the probe tip when
the hook clip is not used. This also avoids the
risk of accidently interconnecting the reference
contact of multiple probes when groundleads
are connected or avoids short-circuiting any
circuitry via the bare ground ring of the probe..
To Next Page
Loading...
