To Next PageTo Next Page
Need help?Do you have a question about the Fluke SMFT-1000 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Continuity Test | Yes |
| Display | LCD |
| Interfaces | USB |
| Battery Type | Li-ion battery |
| Weight | Approx. 1.5 kg |
| Insulation Test Voltage | 250 V, 500 V, 1000 V |
| Insulation Resistance Range | 0.01MΩ to 200MΩ |
| Power Supply | Rechargeable Li-ion battery |
| Safety Standards | IEC 61010-1 |
| Type | Multifunction PV Tester |
Overview of the Fluke SMFT-1000 Multifunction PV Analyzer.
Covers essential safety information and warnings for using the PV Analyzer.
Details electrical characteristics, dimensions, weight, battery, and fuse specifications.
Covers operating conditions, accuracy definitions, and measurement ranges for key functions.
Provides detailed accuracy and measurement ranges for various tests like RINS, VBD, and SPD.
Specifies accuracy for AC/DC current and power measurements using the i100 clamp.
Lists relevant safety and compliance standards such as IEC 61010.
Details performance characteristics, EMC, and wireless module specifications.
Lists the contents included in the SMFT-1000 kit.
Explains the rotary dial, buttons, and display for operating the PV Analyzer.
Details the input terminals and proper test lead connections for various measurements.
Lists and explains error codes displayed by the PV Analyzer during operation.
Explains how to use the zero adapter to compensate for test lead resistance.
Instructions for wirelessly pairing the PV Analyzer with the Irradiance Meter.
Details procedures for Category 1 tests according to IEC 62446-1 standard.
Procedures for measuring continuity and resistance of earthing/bonding conductors.
Tests polarity, combiner box connectors, and PV string voltage/current.
Tests max voltage and current produced by solar panels under STC.
Tests insulation resistance between PV Array and earth using various methods.
Measures voltage and current to create I-V curve for solar panels.
Performs bypass diode, blocking diode, and surge protection device tests.
Tests PV system power output and inverter efficiency, including single/3-phase.
Measures AC or DC voltage and current, automatically detecting the type.
Automatically performs test sequences based on various combinations and configurations.
Accesses options like Memory, Device Settings, and Help for device configuration.
Downloads test measurements from PV Analyzer to a PC via IR port.
Instructions for downloading PV model data using the TruTest software.
Covers fuse/battery replacement, cleaning, and environmentally responsible product disposal.
