Please consider your environment when
you dispose of your one-way batteries.
They belong in a trash dump for hazardous
waste. In most cases, the batteries can be
returned to their point of sale.
Please, comply with the respective
valid regulation regarding the return,
recycling and disposal of used batte-
ries and accumulators.
Technical Data
LED voltage range 12...690V AC/DC
LED resolution ±12, 24, 50, 120, 230, 400,
690V
Tolerance complying to DIN VDE 0682,
Part 401
Voltage detection automatic
Acoustic signal (AC voltage) yes
Polarity detection full range
Range detection automatic
Response time <0.1s LED
Frequency range DC, 0...65 Hz
Automatic load (RCD) yes
Internal basic load approx. 2.1 W at 690V
Test current < 3,5 mA
Peak current Is = 0.2 A
Operation time ED (DT) = 30s
Recovery time 240 s
Auto Power On > 12 V AC/DC
Single-pole Phase Test
Voltage range 100...690 V AC
Frequency range 50...65 Hz
Continuity Test
Resistance range 0...200 kΩ
Accuracy RN +50%
Test current 3 µA
Overvoltage protection 690V AC/DC
Power supply 2 x 1.5 V Micro IEC LR03
Power consumption max. 30mA / approx. 250mW
Temperature range -10°C...55°C
Humidity max. 85% relative humidity
Height above sea level up to Tm
Overvoltage class CAT III / 600 V
Degree of contamination2
Type of protection IP54
Safety complying to DIN EN 61243-3, DIN VDE
0682 Part 401 (first DIN VDE
0680 Part 5, EN 61010, IEC
61010)
Weight 130g (incl. batteries)
Dimensions (HxWxD) 210 x 40 x 22 mm
Fluke T50
Technical Data
12
To Next Page
Loading...
Need help?
General
