industrial applications as well as for house-
hold uses.
The voltage testers FLUKE T50 characteri-
sed by the following features:
• Constructed in compliance with DIN EN
61243-3, DIN VDE 0682 Part 401 (previo-
usly DIN VDE 0680 Part 5), IEC61010
• DC and AC voltage measurement up to
690V
• Single-pole phase test
• Continuity test / diode test
After unpacking, verify that the instrument
is undamaged. The scope of supply com-
prises:
1 FLUKE T50
2 Batteries 1.5V IEC LR03 AAA
1 Instruction manual
Safety Measures
The FLUKE T50 instrument has been con-
structed and verified in compliance with the
safety measures for voltage testers DIN EN
61243-3, DIN VDE 0682 Part 401 (previo-
usly DIN VDE 0680 Part 5), EN 61010, and
IEC 61010 and have left the factory in safe
and perfect condition.
In order to avoid electrical shock, the
valid safety and VDE regulations regar-
ding excessive contact voltages must
receive utmost attention, when working
with voltages exceeding 75V (60V) DC
or 50V (25V)rms AC.The values in bra-
ckets are valid for special ranges (for
example medicine and agriculture).
Prior to measurement ensure that the
test leads and the test instrument are
in perfect condition.
Fluke T50
Safety Measures
5
To Next Page
Loading...
Need help?
General
