19
Specifications
Accessories
To order accessories, contact your local Fluke Networks
distributor.
Specifications
Description
Fluke
Networks
Model Number
Belt clip, lockable (both ends) P4080248
Belt clip, non-lockable (both ends) P4080249
Standard Line Cord (STD) with
Piercing Pin Clips
P4480001
Central Office Line Cord with 346A
Plug
P4480004
Angled Bed-of-Nails Cord (ABN)
and Piercing Pin Clips
P4480009
Electrical
Current Range (Off-
Hook)
10 mA to 100 mA
DC Resistance
Off-Hook 150 Ω nominal
On-Hook >3 MΩ
AC Impedance
Off-Hook 600 Ω nominal; 300 Hz to
3400 Hz
On-Hook >120 kΩ; 300 Hz to 3400 Hz
Rotary Dial Output
Pulsing Rate 10 pps ±1 pps
Break/Make Ratio 60/40
Interdigit Interval >300 ms
Resistance During
Break
>100 kΩ
DTMF Output
Tone Frequency
Error
±1.5 % maximum
Tone Level -3 dBm combined (typical)
High versus Low
Tone Difference
2 dB ± 2 dB
Memory Dialing
Memory Capacity 10 speed dial memories plus
one last number redial memory
Digit Capacity 23 digits per memory
PBX Pause Duration User programmable; default of
4 seconds
Hook Flash
Duration
User programmable; default of
600 ms
Automatic Speaker
Shut Off Duration
User programmable; default of
2 minutes
Battery 9 V alkaline or lithium battery
Physical
Measurement 10 in x 3.75 in x 4.25 in (254 mm
x 96 mm x 107 mm)
Weight Less than 1.5 pounds (0.68 kg)
with one belt clip
Water Resistance Designed to be rain and
moisture resistant.
Environmental
Temperature Range
Operating: 29 °F to 140 °F (-34 °C to 60 °C)
Storage -40 °F to 150 °F (-40°C to 66 °C)
Altitude To 10,000 ft (3,000 m) max
Drop Two 20-foot drops and twelve
12-foot drops onto concrete
Note
Specifications subject to change without notice.
To Previous Page
Loading...
