Wireless AC Voltage
Before Calibration Adjustment
hcc07.eps
Figure 2. Performance Test Connections
Before Calibration Adjustment
Before the Product calibration can be adjusted, you must go through the
maintenance mode menu and enter your password.
Maintenance Mode
The Product maintenance mode can be used to set different parameters on the
Product that include auto power off, backlight adjustment, and calibration. To use
the maintenance mode:
1. With the Product on, push and hold .
2. Push �. Keep pushed until all the display segments are shown.
3. Release and �.
The Product is now in maintenance mode.
7
To Next Page
Loading...
