VT02, VT04A, VT04
Users Manual
10
Capture and Save
The Product saves up to 10,000 images/GB on the micro SD memory card.
Note
Use the micro SD memory card to download images from the Product
to a PC. The micro-USB cable is for battery charging only.
To capture the image and save it to memory:
1. Point the Product at the object or area of interest.
2. Pull the trigger to capture the image.
The image remains frozen for about 4 seconds. Next, a dialog box prompts
you to save or discard the image.
3. Push to save or to discard the image.
The display has an icon that shows the current status of the micro SD memory
card, see Figure 5.
1 2
3
4
hak02.eps
Figure 5. Micro SD Memory Card Warning Icons
No Micro SD Memory Card in slot
Micro SD Memory Card error
Micro SD Memory Card empty
Micro SD Memory Card full
Note
A routine file back-up procedure is recommended for the micro SD
memory card to store these files in a safe location.
To Next Page
Loading...
Need help?
General
