FPC100 has been tested and found to comply with the limits for a class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. FPC100 generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with this manual, may cause harmful interference, in
which case, the user will be required to correct the interference at their own expense.
Canadian specifications
DOC (Department of Communications)
FPC100 does not exceed the Class A limits for radio noise emissions from digital apparatus
as set out in the Canadian interference-Causing Equipment Regulations.
Part numbers
FPC100 including current transformer (CT)
Pump main voltage (50/60Hz) CT primary rating (A) Part number
3×100–240V 10 652 02 01
25 652 02 02
50 652 02 03
100 652 02 04
3×380–500V 10 652 02 05
25 652 02 06
50 652 02 07
100 652 02 08
3×525–690V 10 652 02 09
25 652 02 10
50 652 02 11
100 652 02 12
FPC100
3×100–240V 84 03 74
3×380–500V 84 03 75
3×525–690V 84 03 76
Current transformer (CT)
10A 83 95 85
25A 83 95 86
50A 83 95 87
100A 83 95 59
Front panel kit
83 94 12
Contains Dimension Parts
Plastic door (IP54) 130×77 mm (5.12″×3.03″) 1 pcs
Mounting plate 128×108 mm (5.04″×4.25″) 1 pcs
TECHNICAL SPECIFICATIONS
Single pump controller Installation and user manual for FPC100 23
To Next Page
Loading...
Need help?
General
