FlySky FS-ST8B - Function Menu; Boat Position (Psn); Fish Spot Setting; Auto Home Function

FS-ST8B&FS-Br01
Digital Proportional Radio Control System
Website
8
This transmitter function menu includes the following functions, which can be set by users as required, including
Boat Psn, Fish spot setting, Auto Home, Bind setting, Basic setting and System settings.
4. Function Menu
4.1 Boat Psn(Boat position)
4.2 Fish Spot Setting
4.3 Auto Home
4.4 Binding Setting
Use to display the position of the bait boat in real time, including the bathymetric data of
the current location, the temperature, and the distance between the current position and
the starting point. Ensure the transmitter and the receiver are connected normally and
the starting point is saved before enabling this function. This function is related to the
speci󽗉c protocol.
When this function is enabled, the bait boat will automatically start to return to the
starting point after the baiting is 󽗉nished at the 󽗉shing point. Note that the starting point
must be saved before enabling this function.
You can set [Start point] and [Fishing point] through this function. A total of 30 󽗉shing
points can be set. You can navigate from one 󽗉shing point to another. As a result, you can
start from the starting point and navigate to the 󽗉shing point automatically.
You can select [Manual] or [Auto]. When you select [Manual], the manual interface
appears, displaying the current boat direction and distance between the boat and 󽗉shing
point. The bait boat will approach the target 󽗉shing point through manual operation.
When you select [Auto], the bait boat automatically arrives at the 󽗉shing point saved
according to the direction de󽗉ned by the GPS. This function is related to the speci󽗉c
protocol.
It is used to complete the bind between the FS-ST8B transmitter and FS-Br01 receiver.
The transmitter supports two-way binding. The transmitter will display the information
returned from the receiver after the two-way binding is completed. In addition, the bind
settings (between the transmitter and receiver) has been completed before delivery from
the factory.
Note: The function is available only when the bait boat is enabled with the auto-cruise.