FlySky FS-ST8B - Basic Setting

Website
9
4.5 Basic Setting
Used to set basic functions, including Stick calibration, Firmware Update, About and More.
4.5.1 Stick Calibration
The calibration is required in case of data o󽗈set of the transmitter due to physical wear in
long-term operations. At this time, we need to calibrate the output data and neutral angle
of the stick, and potentiometers. The transmitter has been calibrated before ex-factory.
4.5.2 Firmware Update
Put the transmitter into a 󽗉rmware update state. When the 󽗉rmware needs to be upgraded,
it is need to put the transmitter into upgraded mode using this function 󽗉rst. You can
update the 󽗉rmware by downloading the latest version of the transmitter 󽗉rmware from
your computer or by using the FlySkyAssistant.
4.5.3 About
In this function, you can view some information, such as the product name, 󽗉rmware
version, 󽗉rmware release date, and hardware version.
4.5.4 More
See more contact informations about our companny.