To Next PageTo Next Page
Need help?Do you have a question about the FMC Technologies INVALCO 64908265 and is the answer not in the manual?
General| Brand | FMC Technologies |
|---|---|
| Model | INVALCO 64908265 |
| Category | Measuring Instruments |
| Language | English |
Details on upstream and downstream piping requirements for proper turbine flowmeter installation.
Instructions for connecting the magnetic pickup to the flowmeter.
Steps to remove cartridge-type internals from 3/4" to 2" turbine flowmeters.
Procedure for removing and replacing internals in older 4-inch and 3-inch flowmeters.
Steps for installing new internals into 4-inch turbine flowmeters.
Explanation of how magnetic pickups sense flow and generate AC cycles via rotor blades.
Overview of various magnetic pickup models with specifications and stock numbers.
Table detailing physical dimensions for NPT, Wafer, Grooved, and Flanged flowmeter types.
Description of WAK-2, EAK-2, and EAK-2AX-P enclosures for magnetic pickups.
Details on standard, high-temperature, and pre-amp/RF cable assemblies with part numbers.
Part numbers for internal components and kits for 'W' Series flowmeters.
Part numbers for internal components and kits for 'WFP' Series flowmeters.
Part numbers for internal components for 'WSP' Series 3A Sanitary flowmeters.
Details on linearity, repeatability, materials, and temperature ratings.
Table showing meter sizes, flow ranges, and nominal K-Factors.
Guidelines for cleaning and maintaining 3-A sanitary turbine flowmeters.
Formulas for converting flow rates, pulses, and units of measure.
Technical specifications for the Model 4200 Rate/Totalizer, including display and input.
Steps for basic setup of the Model 4200 without pulse or analog output.
Explanation of display modes and procedure for programming K-Factor for the Model 4200.
Procedure for setting up linearization using multiple K-factors in the Model 4200.
Setting decimal positions for rate/total and configuring the time scale.
Enabling and setting the scale for the scaled pulse output.
Setting up password protection and instructions for changing the battery.
Information on connecting input signals and wiring practices for the Model 4200.
Diagrams for connecting various input signals and output options.
Precautions regarding EMF, vibration, and wall mounting procedures.
Entity parameters and diagram for hazardous area intrinsic safety connections.
Dimensional drawings and installation notes for wall panel and direct mounting.
