Focus Industries Handler I - System Specifications

43Handler I, II & III Operator’s Manual - October 2008
System Specifications
Handler I
Tank: Polyethylene.
Capacity: 15 US Gallons or 59 Lites.
Frame: Powder coated steel.
Fittings: Fiberglass filled polypropylene.
Hose: Clear braided PVC (pressure side) or PVC suction
(suction side of system).
Clamps: All stainless steel.
Lid: 15 inch polypropylene.
Venturi: 1 ½” fiberglass filled polypropylene (Threaded p/n
85-HV150, Manifold p/n 85-HV150FLA)
Venturi performance (volume draw): 35 US Gallons/minute
(29 imperial gallons / minute or 131 liters/ minute) at an
operating pressure of 50 psi.
NOTE: Venturi performance may vary depending on
application, conditions, restrictions and pressures. Per-
formance data is based on water.
Height: 35” with lid on.
Width: 21” for tank and frame (without plumbing attached),
20” tank only.
Handler II
Tank: Polyethylene.
Capacity: 42 US Gallons or 160 liters.
Frame: Powder coated steel.
Fittings: Fiberglass filled polypropylene.
Hose: 1” clear braided PVC or 1 1/2 “ PVC suction or 2”
Ribbed EPDM Kanaflex.
Clamps: All stainless steel.
Lid: Polypropylene, 15’ closed lid with gasketed rim.
Venturi: 2” flanged, fiberglass filled polypropylene.
Venturi performance: 49 US Gallons/minute (41 imperial
gallons or 186 liters/minute) at an operation pressure of 50
PSI.
NOTE: Venturi performance may vary depending on
the application, product, conditions, restrictions and
pressure. Performance data is based on water.
Height: 40” with lid on.
Width: 34” with plumbing (27” diameter without plumbing).
Length: 32” with plumbing only, 53” with pump bracket
and pump attached.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Handler III
Tank: Polyethylene.
Capacity: 70 US Gallons or 275 liters.
Frame: Powder coated steel.
Fittings: Fiberglass filled polypropylene.
Hose: 1” clear braided PVC , 1 1/2 “ PVC suction , 2 or 3 ”
Ribbed EPDM Kanaflex.
Clamps: All stainless steel.
Lid: Polypropylene, 15’ diameter hinged lid with check
valve breather.
Venturi: 2” flanged, fiberglass filled polypropylene.
Venturi performance: 49 US Gallons/minute (41 imperial
gallons or 186 liters/minute) at an operating pressure of 50
PSI.
NOTE: Venturi performance may vary depending on
the application, product, conditions, restrictions and
pressure. Performance data is based on water.
Height: 44” with lid on.
Width: 44” with plumbing (36” diameter without plumbing
attached).
Length: 44” with plumbing only, 56” with pump bracket
and pump attached.
NOTE: Specifications subject to change without notice.
•
•
•
•
•
•
•
•
•
•
•
•
•