Focusrite iTrack Solo Getting Started Guide

WARNING: Excessive sound pressure levels from earphones and headphones can cause hearing loss.
WARNING: This equipment must only be connected to USB 2.0 type ports.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.

Focusrite iTrack Solo Specifications

General

Sample rate	98 kHz
Audio quality	24 bit
Frequency range	20 - 20000 Hz
Microphone maximum input	1
Microphone Total Harmonic Distortion (THD)	0.002 %
XLR in	Yes
I/O ports	2x XLR In, 6.35mm In, USB2.0 B, TRS Out, 2x RCA Out
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product color	Black
Compatible operating systems	- Windows 7 / 8\\r - Mac OS X 10.7 / 10.8

Weight and Dimensions

Weight	500 g
Dimensions (WxDxH)	150 x 100 x 45 mm