16
Dante Virtual Soundcard setup
RedNet 4 only, no switch, straight to host Ethernet port
CAT 6
Ethernet
Cable
8 Channel Mic Pre
This shows the very simple network required if your system does not include a RedNet PCIe card.
The host computer would instead have the Dante Virtual Soundcard installed, and a single Cat6
connection between RedNet 4 and the host’s resident Ethernet port would suffice. This system would
be ideal for basic high-quality recording but would require monitoring to be through an amplifier/
speaker system connected directly to the host computer’s resident audio output.
To Next Page
Loading...
