17
RedNet audio distribution system – no DAW
RedNets 1 – 4 in different rooms, audio networking only
In this more complex, centralised system, users in any room would be able to access audio sources
from any other room. Each room has its own local Ethernet switch, and each is connected in turn
back to a central switch in the machine room. The host computer – which may or may not be a DAW
platform – is connected to this central switch.
In such a system, the routing of any physical input to any physical output somewhere else in the
system would be set up using Dante Controller, which permits specific, per-channel routings to be
made at will.
To Next Page
Loading...
