Focusrite Saffire Pro 24 - Connectivity and Physical Details; Analogue and Digital Connectivity; Front Panel Indicators and Other I;O; Troubleshooting

34
Front and Rear Connectivity
Analogue Channel Inputs (Inputs 1-4)
• 2 Mic XLR Combo (channels 1-2) on front panel
• 2 Line ¼” TRS (channels 3-4) on rear panel
• Automatic switching between Mic / Line (channels 1-2)
• Switching between Line / Instrument Inputs (channels 1-2) via Safre MixControl Application
• Switching between +16dBu (low) and -10dBV (high) gain on inputs 3-4 via Safre MixControl Application
Digital Channel Inputs (Inputs 9-26) 44.1 - 96kHz
• Stereo S/PDIF input on RCA
• 8 ADAT inputs on Optical Connector, reduces to 4 inputs at 88.2/96kHz
• Optical ADAT Input can be switched to S/PDIF 3/4 in software preferences (ADAT Input disabled)
Analogue Audio Outputs (Outputs 1-6)
• 6 ¼” TRS Jacks
• Output Level control (analogue) for outputs 1 and 2
• Stereo Headphones Mix 1 on ¼” TRS (also routed to Outputs 3 & 4) with VRM and independent volume control
Stereo Headphones Mix 2 on ¼” TRS (also routed to Outputs 5 & 6) with independent volume control•
Digital Channel Outputs (Outputs 8-9) 44.1 - 96kHz
• Stereo S/PDIF Output on RCA
Other I/O
• 1 6-pin FireWire S400 socket
• 2 Standard 5-pin DIN MIDI connectors: In and Out
• DC Power Input Connector (for use with supplied universal input power supply)
Front Panel Indicators
• 4 5 segment input meters, -42, -18, -6, -3 and 0dBFS
• LKD “Lock” Indicator
• FW “Host Connected” Indicator
• “Power” LED
• Instrument input source selection LED for channels 1 and 2
48 V Phantom Power LED•
Dim and Mute LEDs•
Weight and Dimensions
• Dimensions: approx. 21.5 x 4.5 x 22cm (W x H x D)
• Weight: 1.5kg
Troubleshooting
For all troubleshooting queries, please visit the Focusrite Answerbase where there are articles covering numerous troubleshooting
examples. www.focusrite.com/answerbase.
E & O.E.