19
Using the Scarlett 8i6 as a stand-alone mixer
The Scarlett 8i6 has the ability to store a mix configuration defined in Focusrite Control within the
hardware. This feature lets you configure it – for example, as an on-stage sub-mixer – using your
computer, and then upload the configuration to the device itself. Then you can use the Scarlett 8i6 as
a simple local mixer as part of your equipment rig to control the overall mix of multiple instruments.
To FOH Mixer
In the example illustrated, a guitar, stereo and mono synths and a electronic groovebox
instrument are connected to the six analogue inputs of the Scarlett 8i6; Outputs 1 and 2 go to
the main PA system. The player can set up a rough mix in Focusrite Control and then adjust the
levels of the two mono sources against the stereo ones from the front panel.
To Next Page
Loading...
