Need help?Do you have a question about the Focusrite Scarlett OctoPre Dynamic and is the answer not in the manual?
General| Gain | 50 dB |
|---|---|
| Control type | Buttons, Rotary |
| Sample rates | 44.1 - 192 kHz |
| Product color | Black |
| LED indicators | Power, Signal strength |
| Frequency range | 20 - 20000 Hz |
| Built-in display | No |
| Output impedance | 136 Ω (Balanced) - for units with serial number ≤ W960065003383 576 Ω (Balanced) - for units with serial number > W960065003383 Ω |
| Phase reverse switch | Yes |
| Total Harmonic Distortion (THD) | 0.1 % |
| 6.35 mm (1⁄4-inch) output | 8 |
Weight and Dimensions| Depth | 286 mm |
|---|---|
| Width | 482 mm |
| Height | 44.5 mm |
Explains the operational controls and metering located on the front panel of the Scarlett OctoPre Dynamic.
Details the inputs, outputs, and connectors found on the rear panel of the Scarlett OctoPre Dynamic.
Guides on adjusting input gain levels using LED meters to prevent clipping and distortion.
Details how to activate and adjust the channel compressor and its "MORE" function.
Provides detailed performance figures for microphone, line, and instrument inputs and outputs.
Lists physical dimensions, weight, connectors, and electrical specifications of the unit.
To Next Page