that value is the correct and settled value. For more info see ”Wash out mode”. (
Extra measurement
On the home-screen there is a button called ”Extra measurement”. When pressed,
the Alkatronic will perform an extra measurement independently of the settled
measurement interval. "
Table/history
On the home-page below the graph, there is a button"
called Table/history. "
When pressed, you will get additional data in table form. If
you want older history, go to ”cloud-functions”. "
Aquarium volume
In settings you can enter the total volume of your aquarium
system. The machine uses this value to calculate the proper amount of carbonate to
dose if your dKH gets below your low reference value. In settings, you also can
choose the unit between liter and gallon. "
"
Reference values/actions
This is where you set your low and high
dKH reference values for when you want
the machine to intervene if the measured
dKH is outside these values "
To Next Page
Loading...