EasyManua.ls Logo

focuway M2 - Installation guide

focuway M2
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
REMINDER
FOCUWAY
®
After-sale Support Team E-mail:
support@focuway.com
In hot weather, do not expose the camera directly to the sun
when the car is parked. The working temperature UP to 65°C
if the working temperature, exceeding the max working
temperature may damage the screen.
We don’t recommend to turn on the motion detection function
when driving, it will affect continuous recording of the dash cam.
The battery of the camera (200mA lithium battery) is only for
emergence file backup. M2 dash cam will shut off within 5
seconds when disconnecting the power, this is to save the battery
power to store important videos. The fully charged battery cannot
support too long continuous recording. So we recommend
connecting an external power supply if you want the dash cam to
keep working after parked. A power bank or hard wire kit will be
ok. But if you want to the dash cam keep working after engine off
without connect any external power, you can set the ‘Delayed
Power Off’ function to OFF or turn on the dash cam manually.
The dash cam will automatically power on and start recording
when you start the engine, please note, if the dash cam doesn't
connect to power supply and you turn it on manually, it will not