92 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E
Command:
VIEWR nn
Description: Recall View
Parameters: nn – View Index [0 - 15]. Index 0 is default view (i.e. Zoom = 100%, Pan H = 0%, Pan V = 0%)
Example: VIEWR 1 (Recall saved View 1.)
Command:
VIEWS nn
Description: Save current View to non-volatile memory
Parameters: nn – View Index [1 - 15]
Example: VIEWS 1 (Save current View to Index 1.)
Command:
VIEWI? in
Description: Query saved Input channel View settings (i.e. Zoom setting, Pan H setting, Pan V setting)
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
Returns: nnn.n - Zoom value [min-max] depends on scale factor
hhh.h - Horizontal Pan (-100.0% - +100.0%)
vvv.v - Vertical Pan (-100.0% - +100.0%)
Example: VIEW? 1 (Query View settings for channel 1.)
Command:
VIEWIR
Description: Recall currently routed Input channel’s View
Parameters: None
Example: VIEWR (Recall saved Input channel View for currently routed channel.)
Command:
VIEWIS in
Description: Save current View to non-volatile memory for selected Input channel
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
Example: VIEWIS 1 (Save current View for channel 1.)
Command:
ZOOM nnn.n
Description: Selects zoom scale factor (applied both horizontally and vertically.
Parameters: nnn.n - Zoom value [min-max] depends on scale factor
Query:
ZOOM?
Returns the current zoom scale factor in the format
= nnn.n
Example: ZOOM 200.0 (Zoom into the image using a 200.0% scale factor)
ZOOM? (Queries current zoom scale factor.)
To Next Page
Loading...