FOLSOM IP-2003 - Resolution Remote Commands; Imagepro Tm Command List;Description

68 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E
ImagePRO
TM
Command List/Description
Resolution Remote Commands
Command:
RESH
Description: Query the available resolution list for the ImagePRO.
Parameters: None
Returns: All available resolutions in the format:
n : HxV @F (example: 20 : 1024x768 @59.94)
Example: RESH (Query all available resolutions)
Command:
RESI nn
Description: Set current channel’s Input Resolution. If Auto Acquire is On, setting Input resolution with this
command may be overridden.
Parameters: nn - Input Resolution (use RESH command for resolution list)
Query:
RESI? in
Returns the Input Resolution for the specified channel in the format
= nn
Example: RESI 1 (Set Input Resolution of currently selected input channel to resolution index 1 (NTSC(480i))
RESI? 1 (Queries Input Resolution for channel 1)
Command:
RESO nn
Description: Set Output Resolution.
Parameters: nn - Output Resolution (use RESH command for resolution list)
Query:
RESO?
Returns the Output Resolution in the format
= nn
Example: RESO 1(Set Output Resolution to resolution index 1 (NTSC(480i))
RESO? (Queries Output Resolution)