FOLSOM IP-2003 - Logo Remote Commands

Manual # 26-0302000-00 / Revision E ImagePRO – Multi Format Image Processor
89
Logo Remote Commands
Command:
LOGOD
Description: Delete Logo image from non-volatile memory. Selecting Black/Logo channel will now display black.
Logo feature only available on ImagePRO-SDI and ImagePRO-HD.
Parameters: None
Example: LOGOD (Delete saved Logo image.)
Command:
LOGOL
Description: Load current output image from non-volatile memory as Logo image. Logo feature only available on
ImagePRO-SDI and ImagePRO-HD.
Parameters: None
Example: LOGOL (Load current output image as Logo image.)
Command:
LOGOS
Description: Save current output image in non-volatile memory as Logo image. Logo feature only available on
ImagePRO-SDI and ImagePRO-HD.
Parameters: None
Example: LOGOS (Save current output image as Logo image.)
Command:
LOGOI
Description: Query the stored Logo image resolution. Logo feature only available on ImagePRO-SDI and
ImagePRO-HD.
Parameters: None
Example: LOGOI (Query Logo resolution.)